The function of the self-loading mixer truck drive device is to drive the concrete tank to rotate. If the drive device fails, the entire concrete tank will not rotate, which will cause the concrete in the car to be scrapped. In severe cases, the entire tank of concrete will condense in the tank, causing the car to be scrapped. So we should do a good job of its maintenance.
1. Ensure the cleanliness of the hydraulic oil. The working environment of the self-loading mixer truck is harsh, and it is necessary to prevent sewage and mud from entering the hydraulic system. The hydraulic oil should be replaced regularly according to the requirements of the user manual. Once water or mud is found mixed in the hydraulic oil during inspection, the hydraulic system should be stopped immediately to clean the hydraulic system and replace the hydraulic oil.
2. The universal rotating part is a fault-prone part. Grease should be added on time, and the wear should be checked frequently, and repaired and replaced in time. There should be a spare universal shaft assembly to ensure that it can resume work within tens of minutes in case of a fault.
3. Ensure that the hydraulic oil cooling device is effective. Clean the hydraulic oil radiator regularly to prevent the radiator from being blocked by cement, check whether the radiator electric fan is running normally, and prevent the hydraulic oil temperature from exceeding the standard. As long as the hydraulic oil is kept clean, the hydraulic part generally does not have many faults; but the service life varies from manufacturer to manufacturer.
The above is the maintenance method of the self-loading mixer truck drive unit. I hope everyone can perform regular maintenance to improve work efficiency and extend its life.
Post time: Nov-01-2024